This mark, which stands for European Conformity "Conformité
Européene", indicates that “The instrument complies with the
European product directives, health, safety and
environmental protection legislations”. See Section 12.1
Declaration of Conformity and Certification for details.
If these marks are displayed on the instrument, they indicate that
“This product has been tested to the Safety Requirements for
Electrical Equipment for Measurement, Control and
Laboratory Use; Part 1: General Requirements of ANSI/UL
61010-1 and CAN/CSA-C22.2 No. 61010-1, second edition, 12
July 2004 including revision 22 July 2005”. Intertek ETL listed
mark, which stands for Electrical Testing Laboratories, identifies
that the product has been tested by Intertek, found in compliance
with accepted national standards, and it meets the minimal
requirements required for sale or distribution.
To Next Page
Loading...
Need help?
General
