Electrical equipment marked with this symbol may not be disposed of in
European domestic or public disposal systems. Return old or end-of-life
equipment to the manufacturer for disposal at no charge to the user.
1.3 Certification Marks Attached to the Instrument
The standard certification marks attached to the instrument and their meanings are summarized below.
Additional certification marks if required for specific markets are at the back of this manual.
This mark, which stands for European Conformity
"Conformité Européene", indicates that “The instrument
complies with the European product directives, health,
safety and environmental protection legislations”.
If these marks are displayed on the instrument, they
indicate that “This product has been tested to Safety
Requirements of Electrical Equipment for
Measurements, Control and Laboratory use; Part 1:
General Requirements of ANSI/UL 61010-1 and
CAN/CSA-C22.2 No 61010-1”. Intertek ETL listed mark,
which stands for Electrical Testing Laboratories, identifies
that the product has been tested by Intertek, found in
compliance with accepted national standards, and it meets
the minimal requirements required for sale or distribution.
To Next Page
Loading...
