42
Use the
NUMBER keys to select the correct day (enter two digits for the
date; i.e., 08:Jul:96 = July 8, 1996). The month will automatically flash.
When the month is flashing, use the
ARROW keys to scroll to the
desired month. Press
ENTER to accept the month.
When the year is flashing, use the numeric keys to enter the last two
digits of the desired year. Press
ENTER to accept the year.
If necessary, press
CE to restore the previous date. Press the DOWN
ARROW
to move to Time.
7. The sixth option is
Time. Press the DOWN ARROW if you do not wish to
change the time settings. To change the time, press
ENTER.Usethe
NUMERIC keys to select the correct hour, minute and seconds (in that
order). The instrument has a 24-hour time format. The maximum
setting is 23:59:59. Enter two digits for each unit of time (i.e.,
19:30:25 = 7:30 p.m. plus 25 seconds). Press
ENTER when the correct
time is displayed.
Press the
DOWN ARROW key to move to the next option.
8. The seventh option under
Setup is Beeper Options.PressENTER to
enter this submenu (press the
DOWN ARROW to skip it).
The first selection under the
Beeper Options submenu is Key Beep.
Press
ENTER if you want to change whether the beeper sounds when
the keys are pressed. Use the
ARROW keys to toggle between off and
on. Press
ENTER when the desired choice is flashing. Press the DOWN
ARROW
key to move to the next option.
The second option under
Beeper Options is Error Beep.PressENTER if
you would like to change if the beeper sounds when errors occur
(press the
DOWN ARROW to skip this). Use the arrow keys to toggle
between on and off. Press
ENTER when the desired choice is flashing.
Press the
DOWN ARROW to move to the next option.
The third option under
Beeper Options is Alert Beep.PressENTER if
you would like to change if the beeper sounds when alerts occur
(press the
DOWN ARROW to skip this). Use the ARROW keys to toggle
between on and off. Press
ENTER when the desired choice is flashing.
Press the
DOWN ARROW to move to the next option.
Press
EXIT to return to the Setup Menu.
The beeper selections are independent of the beeper heard with the
timer or low battery signal. They are always active when appropriate
conditions occur.
To Next Page
Loading...
