Hach DR/2010 - Erasing All Stored Data in One Group; Erasing All Stored Data

58
If the sample is stored in Group 0, the display will only show the sample
number. The rest of the erase sequence is the same.
3.8.2 Erasing All Stored Data in One Group
1. To erase all the data in one group, press the
DOWN ARROW after the
group/sample number is displayed. The display will show:
2. Press
ENTER. The display will prompt:
3. Press
ENTER if you still want to erase the data in that group. The
display will show (for example):
Press
EXIT to leave the erase menu without erasing any data.
3.8.3 Erasing All Stored Data
1. To erase the stored data in all the groups, press
SHIFT ERASE,thenpress
the
DOWN ARROW twice after the group and sample number are
displayed. The display will show:
2. Press
ENTER. The display will prompt:
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888540
*0.16 Erase Grouð 100
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888540
*0.16 Are You Sure?
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888540
*0.16 Grouð:100 Erased
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888540
* Erase All Grouðs
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888540
* Are You Sure?