Hach DR/2010 - Printing Data

52
If the data is stored in more than one group, the display will show
(for example):
2. Enter the desired group number by scrolling to it with the
ARROW keys
or by entering the group number with the numeric keys. Press
ENTER.
The wavelength displayed in
Recall is the wavelength at which the
sample was measured, not the current position of the monochromator.
3. To recall other data within the selected group, use the
ARROW keys to
scroll through the samples in the group.
4. To recall samples stored in other groups, press
EXIT. The display will
show the next group number of stored data (in increasing order). For
example, after reviewing data in Group 1, the display might show:
Press
EXIT until the instrument returns to the measure mode.
3.7 Printing Data
Printed data will include the following information:
• instrument model and serial number
• concentration, absorbance or %T (whichever is displayed)
• date
• time
• group number (for stored data only)
• sample number (for stored data only)
• the wavelength at which the test was read
• warning conditions in effect at the time of measurement
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888
* Recall Grouð 100
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888
* Recall Grouð 272