39
• Lamp operating status (Momentary or Constant On)
• Serial I/O (baud rate, bits, parity)
• Date (day, month, year) and time settings (hours, minutes, seconds)
• Beeper options (for keys, errors and alerts)
• Signal Average
• Language choice (English, French, German, Spanish, Portuguese,
or Dutch))
• User-selected automatic shut off time
• Adjust display contrast (8 settings)
• Updates to existing Hach programs or for new Hach programs
When choosing options from menus, the arrow,
ENTER and EXIT keys help
navigate between menus and within menu options. Pressing the
ENTER key
enters a new menu or allows changes to the portion of the display that is
flashing.
ENTER also accepts the changed setting. Pressing the EXIT key
leaves a menu or tells the instrument to leave the setting as displayed.
Use the
ENTER key to enter a menu. Press ENTER again to change the option
that is flashing (it must flash to change). Use a
NUMERIC or ARROW key to
change the option that is flashing. Press
ENTER again to accept the new
setting. Press
EXIT to leave the menu.
ARROW keys move from one menu item to the next or change the selection
within a menu.
3.2.1 Using the Setup Menu
You may enter the Setup Menu from the Program Menu, the User
Program Menu, Store Menu or Hach Program Menu by pressing
SHIFT
SETUP
. Table 5 is an overview of the Setup Menu options. A detailed
explanation of these items follows.
Table 5 Setup Menu Message Guide
Message Selections
Auto Group ON: Instrument assigns stored samples to a group number that is the
same as the program number. Default is Off.
Group Select group number. Default is 0.
Lamp Momentary or Constant On
To Next Page
Loading...
