78
To change the program name, press
ENTER (if not, press the DOWN
ARROW
). The display will show (for example):
8. Thecursorwillbeflashing.Usethe
SHIFT LEFT ARROW to scroll to the
left in the Program Name. The letters will be erased as you scroll left.
New characters are inserted in the space to the left of the cursor. Press
ENTER to accept the new characters. The SHIFT LEFT ARROW will then be
necessary to bring the cursor back to enter any additional characters.
When finished, press
ENTER to accept the entire name.
Editing the Symbol is the same as editing the Program Name.
The rest of the
Edit Program menu is like the Create Program menu.
Please refer to section 3.10 Creating A User Program.
It may take up to 35 seconds for the instrument to store the changes made
to the user program. Please leave the instrument on during this period.
3.12 Erasing User-Entered Programs
1. Turn the instrument on with the
I/O key. After the self-test the display
will show:
2. Press
SHIFT USER PRGM to go to the Create Program menu.
The display will show:
3. Press the
DOWN ARROW twice. The display will show:
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Nitrate in Pond|
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
*
Enter Proçram #
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
*
Create Proçram
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
*
Delete Proçram
To Next Page
Loading...
