Hach DR/2010 - Page 77

77
Select a user-entered program for review or modification as follows:
1. Turn the instrument on with the
I/O key. After the self-test the display is:
2. If the instrument is in Momentary mode, select the Constant On mode
in the Setup menu (
SHIFT SETUP). Return to the Enter Program prompt
by pressing
EXIT.
3. Press
SHIFT USER PRGM to go to the Create Program menu.
The display will show:
4. Press the
DOWN ARROW once. The display will show:
5. Press
ENTER. The display reads:
6. Press
ENTER if the program number displayed is the program you want
to change. If not scroll to the program using the
ARROW keys or enter
the program number using the numeric keys.
7. When the correct program number is display, press
ENTER.
The display will show:
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Enter Proçram #
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Create Proçram
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888500
* Edit Proçram
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
* Edit Prçm:954
nm
+8.8.:8.8. ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
* Proçram Name: