75
To view the coefficient values, scroll down with the
DOWN ARROW key.
If the calibration table has no points in it, you may press
ENTER and
edit the coefficients. Press
EXIT to continue with the calibration.
40. Press the
DOWN ARROW key. The display will show:
41. To enter a timer, press
ENTER. The display will show:
42. Use the
NUMERIC keys to enter the minutes and seconds desired. For
example, to enter 3 minutes and 30 seconds, press
330.
The display will show:
43. Press
ENTER to accept the time. If an error is made when entering the
time, press
CE to erase the last numeric entry and re-enter the number.
Press the
DOWN ARROW. The display will show:
44. If desired, repeat steps 41-43 to enter up to four timed periods. Press
ENTER to accept each timer. After the last timer is accepted, press the
DOWN ARROW.
If a timer is not needed, press the
DOWN ARROW. The next prompt is:
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Timer 1: Not Set
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Timer 1: MM:SS
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Timer 1: 3:30_
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Timer 2: Not Set
nm
+8.8.:8.8.
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
888450
*
Store Proçram
To Next Page
Loading...
