Phosphorus, Total
Phosphorus, Total
PhosphorusTot_TNT_Other_PAP_Eng_Ody.fm Page 3 of 6
13. Use a funnel to add
the contents of one
PhosVer 3 Powder Pillow
to the vial.
14. Cap tightly and shake
to mix for 10–15 seconds.
The powder will not
dissolve completely.
15. Touch the timer icon.
Touch
OK.
A two-minute reaction
period will begin.
Read the sample within
2–8 minutes after the
timer beeps.
16. After the timer beeps,
wipe the outside of the
vial with a damp cloth
followed by a dry one, to
remove fingerprints or
other marks.
17. Place the prepared
sample vial into the cell
adapter.
18. Touch Read.
Results will appear in
mg/L PO
4
3–
.
Read
To Next Page
Loading...
