Hach POCKET COLORIMETER II Instruction Manual

1—41
Chlorine, Free and Total, HR, continued
7.For free chlorine, wipe
excess liquid and fingerprints
from the sample cell. Put the
prepared sample cell in the
cell holder, then cover the
cell with the instrument cap.
Proceed to step 9 within one
minute after adding the DPD
Free Pillows.
Note: The SwifTest™
Dispenser can be used in
place of the powder pillows
(see page 1—42).
8.For total chlorine, wait
3to 6 minutes after adding
the DPD Total Pillows. After
the reaction time, wipe
excess liquid and fingerprints
from the sample cell. Put the
prepared sample in the cell
holder and cover the cell with
the instrument cap. Proceed
to step 9.
9.Press READ/ENTER.
The instrument will
show “- - - -” followed by
the results in mg/L chlorine
(Cl
2
).
5957088.book Page 41 Friday, March 22, 2013 3:54 PM

Hach POCKET COLORIMETER II Specifications

General

Measurement Method	Colorimetric
Display	LCD
Operating Temperature	0 to 50 °C
Storage Temperature	-40 to 60 °C
Waterproof Rating	IP67
Weight	0.23 kg
Light Source	LED
Range	Varies by parameter
Wavelength	Varies by parameter
Battery Life	Approximately 2000 tests