111
Maintenance and Diagnostics
9.14 Startup
9.15 Software versions
This process guides you through various steps required to set
the instrument up for initial measurements, or to restart after a
long period of inactivity. This includes regulating the sample
flow and purging the pumps of reagent.
This step allows you to regulate the sample flow on each
configured measurement channel.
Regulate the flow of the sample to ensure a slight overflow
into the overflow vessel.
Select OK to continue. You will then be required to regulate
the flow on the next configured channel.
On completion, an Action completed message will be
displayed. Select Esc to exit.
Select the SOFTWARE VERSIONS option for information
regarding the name and version of the installed software.
The screen illustrated left will be shown.
The installed software versions for the analyzer are displayed
for informational purposes.
To exit the display, press the Esc function key.
To Next Page
Loading...
