118
Spare Parts and Accessories
11.2 Spare parts - In contact with sample
11.3 Spare parts - In contact with cell or electrodes
Table 15 Spare parts - In contact with sample
Description Part Number
Cleaning brush for Static heat exchanger system 09240=A=9840
Sample level detector kit (cable, level detector, overflow cell cap, update instructions) 09240=A=0260
Silicone tubing
ø 12x17 mm (per meter) for 924x drain 359110,52012
Set of tools for disconnecting in and out sample tubes on 924x quick fittings 578=507=602
Quick fitting for
ø 6 mm external diameter (O.D.) tubing 578=601=703
Quick fitting for
ø 8 mm external diameter (O.D.) tubing 578=602=703
Tubing in PTFE,
ø 2 x 6 mm (per meter) 590=060=026
In-Line filter for tubing 4 mm I.D; body made of PP 595=000=002
Sampling solenoid valve, 3/2 way, NPS 0.8 (0.2 - 6 bars)
For connector, see P/N 09240=A=9172
For mounting, special torque screw driver at P/N 820=000=006
689=132=008
Solenoid valve on over-flow vessel, 3/2 way (also called conditioning valve)
For connector, see P/N 09240=A=9171
For mounting, special torque screw driver at P/N 820=000=006
689=132=024
Pump 24VDC, membrane, 0.1 L/mn, for 924x flush pump 695=004=004
Table 16 Spare parts - In contact with cell or electrodes
Description Part Number
Electrolyte reservoir for 9245-9240 (complete - includes mounting and tubing) 09240=A=0700
Conductivity sensor for 9245-9240 sodium analyzer
For tightening, see seal P/N 429=120=030
For mounting, see threaded sleeves P/N 359015,20035)
09240=C=0256
Reference electrode for 9245-9240 sodium analyzer 09240=C=0310
Sodium glass electrode for 9245-9240 sodium analyzer 09240=C=0320
Threaded sleeve PG 13.5 359015,20035
Reference electrolyte KCl 3M, 500 ml 363140,00500
O-Ring 12 x 3 mm, EPDM 429=120=030
Cap in PE for 6 mm
ø hole - such as the gas channel of the 9245-9240 measurement cell. 431=210=006
Cap in PE for 20 mm
ø hole - such as the first well of the 9245-9240 measurement cell 431=210=020
0.5L PolyEthylene flask with anti-drop spout 490=001=040
Silicone tubing
ø 6 x 8 mm (per meter) 590=160=080
To Next Page
Loading...
