Hach polymetron 9240 - Table of Contents; Section 12 Default Configuration; User Configuration Table

121
Section 12 Default Configuration
12.1 User configuration table
User Configuration
Option Default Value Possible Values Selected Values Date
MEASUREMENT
pH 11.20 10.00 - 12.00
Tgaz/Twater % 20 0000 - 0250
On-line measure time 10 minutes 0 - 9999 minutes
Smart rinsing No Yes or No
Max. rinse time 45 minutes 0 - 500 minutes
Cycle time 45 minutes 11 - 999 minutes
Search stability No Yes or No
Reactivation
frequency
24 hours 0 - 999 hours
Reactivation fixed date SMTWTFS 15:00:00 Any day and time
Graph time base 12 hours 4 hours
8 hours
12 hours
16 hours
20 hours
24 hours
ALARMS / ALARM 1
Mode Limit Limit
Active channel
Sample flow
None
Attrib Channel 1 Channel 1 - 4
Limit 1.00 ppm 0 - 9990 ppm
Direction Up Up
Down
Delay 0 seconds 0 - 999 seconds
Hysteresis 0% 0 - 10%
Relay N.O. N.O.
N.C.
ALARMS / ALARM 2
Mode Limit Limit
Active channel
Sample flow
None
Attrib Channel 1 Channel 1 - 4
Limit 1.00 ppm 0 - 9990 ppm
Direction Up Up
Down
Delay 0 seconds 0 - 999 seconds
Hysteresis 0% 0 - 10%
Relay N.O. N.O.
N.C.