38
Installation
4.3 Instrument mounting
4.3.1 Panel mounting
For the panel mount model, the dimensions of the panel and fixation holes are as follows:
CAUTION
Whether the instrument is to be mounted on a panel or wall, it is important to note that it must
be placed in an upright position with the transmitter at the top. It is recommended to use a
spirit level to ensure that the instrument is correctly positioned and not leaning to one side or
forward. This is essential to guarantee the accuracy of the analyzer.
Figure 13 Panel mount
0 mm81
[ . in]31 89
mm410
[ . 4 in]16 1
mm60
[ . in]2 36
mm580
[ . 3 in]22 8
mm115
[ . 3 in]4 5
mm430.5
[ . in]16 95
To Next Page
Loading...
