Hach Sigma 900 MAX - Splitter Interface

45
Installation
4.10.1 Splitter interface
Use the Splitter Interface (939) when more than one of the signals listed above are
needed simultaneously. Connecting the interface to the 6-pin connector on the sampler
provides three additional connectors. Two or more interfaces may be connected in series
to allow for additional connections.
Figure 22 Splitter interface
Goodnal STP ST041 Pre Treatment (Sigma 900 MAX All Weather Refrigerated Sampler) Vendor Manual
Q-Pulse Id VM373
Active 29/10/2013
Page 45 of 122