47
Section 5 Basic programming setup
5.1 Initial power-up of sampler
After pressing the ON key, the sampler performs a complete diagnostic test and displays
the menu shown when the unit was last turned off. Set the instrument programming
features when the Main Menu is displayed. The Main Menu is the starting point for all
programming operations. The Main Menu offers four choices:
• Setup—Basic and advanced sampling programming
• Status—Lists all current sampling status, power supply voltage, and values of any
data channels that are enabled.
• Display Data—Shows graphs and tables of logged data
(Displaying Data on page 132)
• Options—Optional device programming
Setup and Option functions lead to sub-menus and will configure the basic and advanced
features of the sampler. Refer to the Quick Start Guides on page 123. The Display Data
and Status Menus lead to sub-menus and will provide information only. Press
STATUS to
display any data channels that have enabled logging (flow, pH, temp., etc.)
5.2 Basic programming setup
Basic programming setup must be performed, step-by-step and in its entirety, after the
instrument is installed. Refer to the Quick Start Guides on page 123 for more information.
The basic program setup will modify the following items:
In addition, several advanced sampling features are found on a sub-menu called
Advanced Sampling. Refer to section 5.3 on page 61 for Advanced Sampling Basic
Programming Setup.
To make changes to the program entries after the basic programming setup, press the
MAIN MENU key and select SETUP, MODIFY SELECTED ITEMS and highlight the program
entry using the
UP and DOWN keys.
To review all information in the Setup and Option menus without worrying about
accidentally changing the information. Use the Review All Items function to verify that the
11:00 AM 21 - APR - 01 * MAIN MENU*
DISPLAY DATA SETUP
OPTIONS STATUS
READY TO START
• Bottles • Intake Tubing
• Program Lock • Program Delay
• Sample Collection • Sample Distribution
• Liquid Sensor • Sample Volume
• Intake Rinses • Sample Retries
• Site ID
Goodnal STP ST041 Pre Treatment (Sigma 900 MAX All Weather Refrigerated Sampler) Vendor Manual
To Next Page
Loading...
