17
SECTION 2 INSTALLATION
2.1 Instrument Environmental Considerations
The instrument enclosure has been tested to IEC 529 IP 62 standards and is
designed for general-duty, indoor installation. Ambient temperatures may fall
within the range of 5° to 40 °C (18° to 104 °F) but they should be nearly constant.
Do not mount the instrument in direct sunlight; shield from dripping water.
2.2 Unpacking the Instrument
Remove the Hardness Monitor from its shipping carton and inspect it for any
damage that may have occurred during shipment. Verify that the Installation Kit,
Cat. No. 55164-00, and Maintenance Kit, Cat. No. 55165-00, are included in
addition to reagents.
If damage is evident or the shipment is incomplete, please contact the Customer
Service Department, Hach Company, Loveland, Colorado for instructions. The
toll-free number is 800-227-4224. Contents of the Installation and Maintenance
kits are listed in Replacement Parts.
To Next Page
Loading...
