Describing the MCS+ Cabinet Components 2-17
P/N 85213-30, Manual revision: B
frequencies rises above the standards. However, there is no impact on the integ-
rity of the procedure information stored in the database. HaemoNet communica-
tion is designed with CRC error checking, performed upon the reception of all
data.
Wireless
antenna
Note: The wireless antenna may not be present on all MCS+ devices. Refer to the
Postscript to the MCS+ Operation Manual (P/N 85270-30), for further information
on the wireless feature and other communication options such as the data card
reader or communication box.
The antenna, located on the rear panel and protected by a hard plastic cover,
allows the transmission of procedure data to a wireless access point connected
to a handheld device, internal PC or network, the eLynx communication system,
or to an external computer network over the Internet.
Figure 2-13, Example of the wireless antenna located on the device rear panel
Manual vacuum
release button
Any MCS+ device with a vacuum centrifuge contains this mechanism which can
interrupt the vacuum effect on the bowl. An MCS+ protocol functioning with the
vacuum centrifuge is designed to automatically release the vacuum force at a
specific point in the procedure. However, it may be necessary for the operator to
do this manually, as in the case of a power failure. In this type of situation, the
operator can depress the button to interrupt the vacuum force and release the
bowl, once the centrifuge and bowl have come to a complete stop.
To Next Page
Loading...
Need help?
General
