Hakko Electronics Monitouch V7 Series - Interface Specifications; Clock and Backup Memory Specifications; Drawing Environment

2
1. Specifications 2-3
Specifications
Interface Specifications
*1 The CBM292/293 printer cannot print screen hard copies.
*2 For more information, refer to V-SFT Additional Specifications.
Clock and Backup Memory Specifications
Drawing Environment
Item Specifications
Serial Interface for PLC Connection
(D-sub 25-pin, female)
RS-232C, RS-422/485
Asynchronous type
Data length: 7, 8 bits
Parity: Even, odd, none
Stop bit: 1, 2 bits
Baud Rate: 4800, 9600, 19200, 38400, 57600, 76800, 115k bps
Serial Interface 1, 2 for Screen Data
Transfer/External Connection
(Modular jack, 8-pin)
RS-232C, RS-422/485 (2-wire connection)
CREC, Barcode, V-I/O, Multi-link 2,
Temperature control network/PLC2Way, V-link, etc.
Printer Interface for Printer
Connection
Compliant with Centronics, half-pitch 36-pin
PR201, ESC/P-J84, ESC/P super function, ESC/P24-J84
CBM292/293 printer
*1
Barcode printer MR400
EPSON printer: STYLUS PHOTO series
*2
CF Card Interface
Compliant with CompactFlash
TM
Ethernet Connection
10BASE-T
(Standard with V7i)
Compliant with IEEE802.3
Baud rate: 10 Mbps
Cables: 100 Ω unshielded twist-pair, category 5, maximum length = 100 m
Item Specifications
Battery Specification Coin-type lithium primary cell
Backup Memory SRAM 64 kbyte
Backup Time Period 5 years (ambient temperature at 25°C)
Battery Voltage Drop Detection Provided (internal memory allocated)
Calendar Accuracy Monthly deviation ±90 sec (ambient temperature at 25°C)
Item Specifications
Drawing Method Exclusive configuration software
Drawing Tool
Name of exclusive configuration software:V-SFT (Ver. 2.00 and later)
Personal computer: Pentium II 450 MHz or above recommended
OS: Windows98/Me/NT Ver.4.0/2000/XP
Capacity of hard disk required: Free space of approx. 460 Mbyte or more
(For minimum installation: approx. 105 Mbyte)
Display: Resolution 800 × 600 or above recommended