HAKO Hakomatic B1050 - III;S (Safety Check)

61
Maintenance and Care
5.3.4 Hako system maintenance
III/S (safety check)
The following maintenance work must
be completed by an authorized Hako
service center at least once a year.
Activity
Interval
Every 1000 operating
hours
Complete all activities in Hako system maintenance I and II,
see paragraph 5.3.2 and paragraph 5.3.3
o
In addition: o
Check the brake linings on the rear wheels; change as necessary o
Change the brake fluid in the service brake o
Including visual inspection, test drive, test report, inspection label and logbook
see paragraph 5.3.2
o