Service Manual
Hako GmbH Technical Service (KUD) 23843 Bad Oldesloe Edition: 05/2014
Confidential - For internal use only!
7.2 Diesel-Version Service Intervals
Service intervals
once
after 50h
every
125 h
every
250 h
every
500 h
Change engine oil (type: SAE 15 W-40)
Change engine oil filter
Clean fuel filter
Check engine speed
Check sealings at filter system
Visual check of V-belts
Change hydraulic filter
Check hydraulic oil level
Check optical condition of machine
Change air filter; main element
Change air filter; saftey element
Check spark plug, replace if required
Check neutral centering of drive pump
Check service and parking brake, adjust if required
Check inflation pressure
Check sweeping track mark and adjust if required
Check broom apron and adjust or change if required
Check V-belt for wearing and correct tension and adjust if required
Basic cleaning of the plate filter
Test drive and function test
Check battery
Check tension of steering chain and adjust if required
Check thread of wheels
Change plate filter
Check lifting-up disposal function (2-hand-operation)