6 FOR MORE INFO REFERENCE OIM MANUAL P/N FSG–MNL–00210
Figure 8 shows the SmartFOAM display when FOAM is turned off. However, if additional FOAM discharges
are active, FOAM stays on (see Figure 3) until the last FOAM discharge is closed.
Figure 8. SmartFOAM Display With No FOAM Discharges Active
2.6 Turn Off FOAM (With SAM)
As stated above, SAM can control multiple FOAM capable discharges. No matter how many FOAM discharges
are active, activating the FOAM OFF bubble turns off FOAM to all FOAM capable discharges and any open
discharge continues flowing water ONLY.
To use SAM to turn off FOAM, perform the following.
ACTIVATING A FOAM OFF BALLOON TURNS OFF THE SMARTFOAM SYSTEM, TURNING OFF FOAM
TO ALL FOAM CAPABLE DISCHARGES, HOWEVER, THE DISCHARGE(S) REMAIN OPEN AND CON-
TINUE TO FLOW WATER ONLY.
A. On SCC Home screen, touch desired active FOAM discharge. Displays Valve X screen (dis-
charge valve control screen) displays.
B. On Valve X screen (discharge valve control screen), swipe FOAM OFF bubble to target (center
of widget).
Figure 9. Turning Foam Off
NOTES
The FOAM OFF balloon activates automatically (the same as a preset would). No confirmation is
required.
If more than one FOAM discharge is open the confirmation popup window appears. Touch the YES
bubble to close the line or the NO bubble to make no change.
To Next Page
Loading...
