PIANO / ENSEMBLE Voice Sections 17
From the screen shown on the previous page, press the DIRECTION “q” button once.
The box to the right of “MONO PRIOR.” should be highlighted.
MONO PRIORITY
This Parameter allows you to adjust which note will sound on the selected Patch if more than one note is
played in MONO Mode.
The data chart below shows the options you may select.
MONO PRIORITY
Parameter Description
Auto If the selected Patch is used with other Voice Sections, the highest note played will sound.
If the selected Patch is used alone, the last played note will sound.
Last The last played note will sound.
Lowest The lowest note played will sound.
Highest The highest note played will sound.
Turn the VALUE knob to make your selection.
To Next Page
Loading...
