PIANO / ENSEMBLE Voice Sections66
From the screen shown at the bottom of the previous page, press the PAGE “u” button once. The
AMPLITUDE EG Page should now display.
The box to the right of “ATTACK RATE” should be highlighted.
AMPLITUDE EG
The Amplitude EG is an Envelope Generator affecting Volume.
ATTACK RATE
This Parameter allows you to adjust the time for the volume to increase to its peak value beginning when a
key is depressed. You can select from 0 to 127.
Turn the VALUE knob to the right to increase the Attack Rate.
Turn the VALUE knob to the left to decrease the Attack Rate.
From the above screen, press the DIRECTION “q” button once.
The box to the right of “DECAY RATE” should be highlighted.
DECAY RATE
This Parameter allows you to adjust the time from the peak amount to the Breakpoint Level. You can
select from 0 to 127.
Turn the VALUE knob to the right to increase the Decay Rate.
Turn the VALUE knob to the left to decrease the Decay Rate.
To Next Page
Loading...
