HAMPTON BAY YJAF-037-E - Inserting Shade into Lower Pole

Assembly (continued)
13
INSERTING THE UMBRELLA SHADE INTO THE LOWER UMBRELLA POLE
Rotate the locking knob 180 degrees clockwise as shown in figure 1.
Insert the umbrella shade (E) into the lower umbrella pole (C) as shown in figure 2.
Rotate the locking knob 180 degrees clockwise as shown in figure 3.
17
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE : : If there is a gap in the locking knob as shown below in figure 3, please rotate the umbrella shade (E) until it is
completely locked as shown in figure 4
E
C
Figure 1
Figure 2
Figure 3
Figure 4