124
• Fill one graduated mixing cylinder up to the 25 mL mark
with the sample.
• Add one packet of HI93730A‑0 Molybdenum Reagent A,
close the cylinder and invert several times until completely
dissolved.
• Add one packet of HI93730B‑0 Molybdenum Reagent B to
the cylinder, close and invert several times until completely
dissolved.
• Add one packet of HI93730C‑0 Molybdenum Reagent C to
the cylinder, close and shake vigorously.
• Fill an empty cuvette with 10 mL of reacted sample (up to
the mark) and replace the cap.
• Insert the cuvette into the instrument and close the lid.
25 mL
10 mL
MOLYBDENUM
To Next Page
Loading...
