7.2.2. FIRST CALIBRATION POINT
Option: Point or Offset
If Point is selected, the slope values adjacent to the calibration points will be reevaluated (normal calibration).
If Offset is selected the existing slope values will not be changed.
7.2.3. EDIT CUSTOM BUFFERS
If you wish to use buffers other than the standard ones, use the Edit Custom Buffers option to set the desired pH value, up to five pH
custom buffers can be set.
Note: Custom buffers are not temperature compensated, enter the value of the buffer at the calibration temperature.
• Use and keys to select the desired buffer.
• Press to delete the selected buffer.
• Press to edit the selected buffer.
To Next Page
Loading...
