Hanna Instruments HI931 - Page 16

12
QUICK START GUIDE
HI931 - Titration Report
Method Name: Neutralization w/ NaOH
Time & Date: 15:01 Jun 13, 2018
Report ID: Ti_00011
Calibration Data
 Buer Potential EciencyTemp.
Time and Date
 4.010pH169.3mV98.8%24.0°CA
11:44 Jun 13, 2018
 7.010pH-5.8mV98.7%23.9°CA
11:42 Jun 13, 2018
 10.010pH-180.7mV98.7%24.0°CA
  11:46Jun13,2018
 GLP&MeterInformation
Sample Name:
 CompanyName:
Operator Name:
 ElectrodeName:
Field 1:
Field 2:
Field 3:
 TitratorSoftwareVersion:v1.00
 BaseBoardSoftwareVersion:v1.00
 Pump1SoftwareVersion:v1.00
 Stirrer1SoftwareVersion:v1.00
Titrator Serial Number: TT180525011
 AnalogBoard1SerialNumber:AB180525005
 Pump1SerialNumber:DP180525004
Stirrer 1 Serial Number: OS180524001
 Analog1CalibrationDate:May25,2018
 MethodParameters
Name: Neutralization w/ NaOH
 MethodRevision:3.0
 AnalysisType:StandardTitration
 StirrerConguration:
Stirrer: Stirrer 1
 StirringSpeed:1400RPM
• Use the and keys to select the report files.
• Press to transfer all available reports to the USB storage device, or highlight the name of the report file to be
transferred and press .
• Transferring a report file will automatically transfer the corresponding log file and titration graph (*.BMP file if applicable).
• Press to return to the General Options screen.
• Press again to return to the main screen.
Titration report
While scrolling with the and keys, the fields below can be seen on the titrator display or printed. The same
information is available on the saved report file (Ti_00007.rpt in this example).