The option keys allow the following operations:
Deletes the highlighted file.
Deletes all currently displayed files.
Copies the highlighted file from titrator to a USB storage device.
Copies all currently displayed files from titrator to a USB storage device.
Returns to the General Options screen.
The status of the transfer (“Successful”/“Unsuccessful”) and the file name of the currently processed file are displayed during copying or
deleting.
Note: The saved files will be stored on the USB key in the HI931 folder, as follows:
- Methods: USB Drive:\HI931\Methods\*.mtd
- Reports: USB Drive:\HI931\Reports\*.rpt
4.2. RESTORE FILES FROM USB STORAGE DEVICE
This screen allows the user to transfer files from the USB storage device to the titrator.
Standard Method Files - HIXXXXYY.MTD (e.g.: HI0001EN.MTD, HI1004EN.MTD)
User Method Files - USERXXXX.MTD (e.g.: USER0001.MTD)
Report Files - Ti_XXXXX.RPT, mV_XXXXX.RPT, pH_XXXXX.RPT, ISEXXXXX.RPT, mVrXXXXX.RPT (e.g.: Ti_00001.
RPT, mV_00001.RPT, pH_00001.RPT, ISE00001.RPT, mVr00001.RPT)
Use the and keys to select the file type.
The number of files and the file name will be displayed.
To Next Page
Loading...
