All of the parameters required to complete an analysis are grouped into a method.
The titrator is supplied with a pack of standard methods, these methods have been developed by Hanna Instruments and can be used to
create user methods.
Standard and user methods can be upgraded, saved or deleted by connecting the titrator to a PC using the HI900 PC application or a USB
storage device.
5.1. SELECTING METHODS
To select a method, press from the main screen. A list of available methods will be displayed.
In the Analysis Methods screen, you can view the list of all available methods (standard and user methods).
To select a method, highlight the method then press , the name of the selected method will be displayed on the main screen.
5.2. STANDARD METHODS
The standard methods are developed for the most common types of analysis.
Only specific method parameters can be modified by the user (see Method Options section).
Also, standard methods can be used as a template to create new user methods.
To Next Page
Loading...
