Note: Only a limited number of methods can be installed on the titrator. The titrator can hold 100 methods (standard and user).
When it is reached, a warning message will be displayed.
5.3.2. DELETING USER METHODS
To remove a user method, press from the main screen. Highlight the user method that you want to delete and press .
A screen will appear in order to confirm the deletion. Press again to confirm, or press to cancel the operation.
5.3. USER METHODS
These methods are defined by the user (usually by modifying a standard method).
The user methods can be developed in accordance with the requirements of the user. All method parameters can be modified by the user.
5.3.1. CREATING USER METHODS
To create a new user method, start from a standard or user method and follow these steps:
• Press from the main screen.
• Using the and keys, highlight an existing method from the method list.
• Press . A new user method will be generated.
• Press to activate the new user method.
To Next Page
Loading...
