Hanna Instruments HI931 - End Point Mode and Determination

5-11
TITRATION METHODS
5.5.6. END POINT MODE
Option: Equivalence Point (pH or mV) or Fixed End Point (pH or mV)
5.5.6.1. FIXED END POINT (pH OR mV)
Fixed End Point (pH):
Option: -2.000 to 20.000 pH
The titration is terminated when the preset pH value has been exceeded. The end point volume is a calculated value based on the
dispensed volume when pH is under the preset value and the dispensed volume when pH exceeded the preset value.