29
6.4.5. DILUTION FACTOR
Option: 001 to 100
This option allows the user to set the dilution factor used in sample preparation. This
allows samples with high concentrations that are outside the measurement range to
be measured. If the sample is not diluted enter a factor of 001.
Press the EDIT key to modify the dilution factor.
Use the or key to highlight the digit to be modified. Press the
or key to set the desired value.
Press the CFM key to confirm the dilution factor or the CLR key to return to the method settings menu without saving.
SETUP
6.4.6. VIAL TYPE
Option: 10mm, 13mm, 16mm, 22mm or 50 mm
This option allows the user to select the vial used for measurement.
Press the EDIT key to select the vial type.
Use the or key to select the vial.
Press the CFM key to confirm the vial type or the CLR key to return to the method settings menu without saving.
6.4.7. NUMBER OF TIMERS
Option: 0 to 5
The option allows you to select the number of timers used in the method.
Press the EDIT key to select the number of timers.
Use the or key to select the number of timers.
Press the CFM key to confirm the number of timers or the CLR key to return to the
method settings menu without saving.
To Next Page
Loading...
Need help?
General
