27
Press the key to select the file type. The selected file type will be displayed on
the screen.
Press the EDIT key to change the file type. Use the or to select the
file type. Press the CFM key to confirm the file type or the CLR key to return to the
previous screen without saving.
Press the key to continue. The "Create" message will be displayed.
Press the CFM key to export the file. To avoid data corruption, do not remove the USB
flash drive until the file transfer is complete.
Note: If no USB Flash Drive is connected you will be prompted to connect the flash drive.
6.3.3. CONNECT TO PC
This option allows the instrument to be connected to a PC. Once the instrument is connected reports and user methods can be
imported or exported directly from the unit.
Press the CFM key to enable the connection. The tag and the message "Connected to PC" will be displayed. Use a file manager
(such as Windows Explorer or Mac Finder) to move the files to/from the meter/PC. The meter will appear as a removable disk. To
avoid data corruption, do not remove the USB cable until the file transfer is complete.
Press the STOP key to disconnect the instrument.
SETUP
To Next Page
Loading...
Need help?
General
