26
Press the key to select the file type. The selected file type will be displayed on
the screen.
Press the EDIT key to change the file type. Use the or to select the
file type. Press the CFM key to confirm the file type or the CLR key to return to the
previous screen without saving.
Press the key to continue. The "Create" message will be displayed.
Press the CFM key to export the file. To avoid data corruption, do not remove the USB
flash drive until the file transfer is complete.
Note: If no USB Flash Drive is connected you will be prompted to connect the
flash drive.
BY DATE
This option allows users to generate and export reports by date.
Press the key. The Start Date screen is shown.
Press the EDIT key to edit the start date. Use the or key to highlight
the digit to be modified. Press the or key to set the desired value.
Press the CFM key to confirm the start date value or the CLR key to return to the
previous screen without saving.
Press the key to select the end date.
Press the EDIT key to edit the end date. Use the or key to highlight the
digit to be modified. Press the or key to set the desired value. Press the
CFM key to confirm the value end date or the CLR key to return to the previous screen
without saving.
SETUP
To Next Page
Loading...
Need help?
General
