volt/div, coupling and probe attenuation.
6. The Trigger Panel
In this panel, the user can change the trigger mode, sweep, source and slope.
7. Displays the system time.
8. Displays Sample Rate
9. Displays the main time base setting.
10. Displays the CH2 information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth limited.
11. Displays the CH1 information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
12. Displays Output Window
13. The markers show the reference points of the displayed waveforms. If there is
no marker, the channel is not displayed.
14. The same as 13.
15. Measure Window.
User’s Manual
18
Hantek 6022BL
To Next Page
Loading...
