2.1 The User’s Interface
Click the software icon on the desk after you finished the software setting
and equipment connecting. Then click icon
to run Hantek6022BE mode.
In addition to displaying waveforms, the display area is filled with many details about the
waveform and the oscilloscope control settings.
1. The Main Menu
All settings can be found in the main menu.
2. The Toolbar
3. Control Panel
4. The Horizontal Panel
The user can change Time/Div, format in the panel.
5. The Vertical Panel
The user can turn on/off the CH1/CH2. Also the user can change the CH1/CH2
User’s Manual
17
Hantek 6022BL
To Next Page
Loading...
