Hantek Hantek6022BL - Default Setup

 Interpolation
 Language
3.6.1 Default Setup
Click “Default Setup” in “Utility” menu to load default setups
When you click the Default Setup in Utility menu, the oscilloscope displays the CH1 and
CH2 waveforms and removes all other waveforms.
The oscilloscope set up for normal operation when it is shipped from the factory and can
be recalled at anytime by user.
The Factory Setup function does not reset the following settings:
 Language option
 Date and time
3.6.2 Language
Click “Language” in “Utility” menu.
There are four languages in “Language” menu. The default language is English.
At the time base 40ns/div or faster, user can use the 3 different interpolation mode to get
waveforms of different smoothness.
User’s Manual
38
Hantek 6022BL