Hantek Hantek6022BL - The Users Interface

5.1 The User’s Interface
Click the software icon on the desk after you finished the software setting
and equipment connecting. Click icon
to run Hantek6022BL mode.
1
2
3
4
5 6
In addition to displaying waveforms, the display area is filled with many details about the
waveform and the logic analyzer control settings.
1. The Main Menu
All settings can be found in the main menu.
2. The Toolbar
3. Control Panel
The user can change sampling rate in the panel.
4. It shows the system time.
5. It shows the device’s state.
6. Output Window
User’s Manual
55
Hantek 6022BL