User Manual 62
Chapter 7 Burst
HDG6000B(C) can output a waveform for a specified number of cycles, called a burst. It supports
control of burst output by internal, external or manual trigger source; supports three kinds of burst
types including N cycle, Infinite cycle and Gated. Burst is allowed with sine, square, ramp, pulse,
Harmonic, noise (allowed only in gated burst mode) or arbitrary waveforms (DC is not allowed).
Select Burst Mode
Burst Type
Burst Period
Burst Phase
Burst Trigger Source
Gate Polarity
Trigger Output Edge
To Next Page
Loading...
Need help?
General