User Manual 83
6. Press Return softkey to exit.
Save
Only state files can be stored via the instrument.
Press Save softkey to automatically create a new state file and save.
Recall
Press Recall softkey to recall the state file or arbitrary waveform file.
Rename
Use the knob to select the specified file or directory and press Rename softkey to rename. Refer
to the operation method of creating a new file. After the completion of the denominate, press
Confirm softkey to confirm.
Delete
Use the knob to select the specified file or directory and press Delete softkey to delete the
selected file or directory.
Refresh
Press Refrash softkey to refresh the file list.
New directory
Please make sure that a USB storage device is inserted and identified by the instrument.
1. In Store interface, press Win softkey to select "Disk" and use the knob to select the USB disk.
Press the knob to enter USB disk directory.
2. Press New softkey to enter the folder name input interface as shown in the figure above.
3. Press Type softkey to select Directory.
4. Operate the new folder following the introduction in "New File".
To Next Page
Loading...
Need help?
General