HARD 1935 - Side Rail Assembly Parts List

SIDE RAIL ASSEMBLY PARTS LIST
# Part Description Part # Notes
1
Side Trim Assembly- 1935 90451
Complete Side Rail AssemblySide Trim Assembly- 1943 & 1955 90222
Side Trim Assembly- 1975
90456
2
Side Trigger Assembly- 1935 89115
One trigger per rail
Side Trigger Assembly- 1943 & 1955 89117
Side Trigger Assembly- 1975 89119
Teething Bars- 1935 *1935 TB
Not shown. Set of 3-
Protective covering for the
tops of the rails.
Teething Bars- 1943 *1943 TB
Teething Bars- 1955 *1955 TB
Teething Bars- 1975 *1975 TB
3 Glide Slide Bushing 11571
Nylon bushing with cutout
4 Bushing 11518
Solid nylon bushing
5 Johns Hopkins Handle Assembly 72115
Complete Handle Assembly
(Does not include Shield Plate)
6 Screw 10-32x1 RH PH MS 63375
Components at the bottom of the
Johns Hopkins Handle
7 Retainer Block 11525
8 Split Lockwasher 63453
9 Acorn Nut C/P 10-32 63411
10 Screw 60148
Top of Shield Plate
11 Split Washer 63457
12 Shield Plate Assembly 81216
Plate behind JH Handle
(Does not include handle)
13 HARD Sticker 62177
Sticker behind JH Handle Assembly
14
“To Lower Side Lift Then Squeeze”
Sticker 63651 Placed above JH Handle
15
“To Raise Side Use Two Hands”
Sticker 63650 Placed on either end of the side rail
14