To disassemble the crib and replace a side rail or a slide rod:
**We recommend this be done with 2 people**
SLIDE ROD OR SIDE RAIL REPLACEMENT
1. At the top of one of the Slide Rods, fi rst loosen and remove the screw and washer.
Repeat at the opposite side of the rail.
2. Halfway down each slide rod at the metal tab called the lug, remove the screw,
nylon washer, lockwasher & acorn nut.
Washer and Screw
Upper Crib Eye
Lug
Screw & Nylon Washer are
on one side of Lug.
The Lockwasher & Acorn
Nut are on the opposite
side.
Instructions continued on next page...
To Next Page
Loading...