HEAD END ASSEMBLY PARTS LIST
# Part Description Part # Notes
1
Head Trim Assembly- 1935, 1943 90719
Complete Head Assembly
Head Trim Assembly- 1955, 1975 90727
2
Head Weld Assembly- 1935, 1943 90254
Outside head end frame only,
no slide rods, gate or curtain assembly
Head Weld Assembly- 1955, 1975 82916
3
Head Gate Assembly- 1935, 1943 90224
Gate with trigger assembly and bushings
Head Gate Assembly- 1955, 1975 90221
4
Trigger Assembly for Gate- 1935, 1943 89267
One per side with Johns Hopkins Handle.
See Side Rail Assembly page for diagram
Trigger Assembly for Gate- 1955, 1975 89132
5 Johns Hopkins Handle 72115 See Side Rail Assembly for more detail
6
Glide Slide Bushing 11571
7
Solid Bushing 11518
8
Slide Rod Assembly 89998
9 Slide Rod Adaptor 11576
Parts are also available in
hardware bag 72080
10 1/8” x 3/4” Spring Pin 63834
11 Bumper Spring- Crib Ends 63845
12 Nylon Washer 11545
13 Plastic spacer 11593
14 Screw 63392
Parts are for the top of the slide rods.
15 Nylon washer 11556
16 Screw 63392
Parts are for the lug in the
middle of the slide rods.
Available in hardware bag 72108
17 Nylon Washer 11556
18 Lockwasher 63453
19 Acorn Nut 62068
20
Head Curtain Assembly- 1935, 1943 90549
Complete curtain assembly
including #21-28
Head Curtain Assembly- 1955, 1975 90551
21
Head Curtain Only- 1935, 1943 63344
Head Curtain Only- 1955, 1975 63286
22
Lift Bar Head End- 1935, 1943 11323
Lift bar only- lift bar glides, trigger
assembly and retaining bar not included.
Lift Bar Head End- 1955, 1975 11321
23
Trigger Assembly for Lift Bar- 1935,
1943 89126
Need 2 per side
Trigger Assembly for Lift Bar 89125
24
End Curtain Retainer- 1935, 1943 11325
Metal bar that holds the curtain
to the lift bar. Screws not included.
End Curtain Retainer- 1955, 1975 11327
25
Screw for Retainer (Not shown) 62185
26
Top Curtain Rod Assembly- 1935, 1943 89198
Includes plastic end pieces
Top Curtain Rod Assembly- 1955, 1975 89199
27
Plastic Curtain End Piece- set of 2 72094
28 Lift Bar Glide 11514 White nylon guide for lift bar
To Next Page
Loading...