Consult Accompanying Documents Alternating Current, Single Phase
Type B Applied Part
Warning Dangerous: Voltage Protective Earth (Ground)
Atmospheric Pressure Limits Humidity Limits
Temperature Transportation Conditions Weight Limits
a) Class 1 equipment
b) Type B equipment
c) IPX4 ingress of water (ordinary equipment)
d
e) Mode of operations continuous with intermittent loading
The following designations of symbols which are found on various labels on the bed and discussed
in the Manual.
Technical parameters of these beds place them in the following categories:
To avoid overheating the motor after raising and lowering the be
d
t
hree full times in successions, HARD Manufacturing Company
re
uires a fifteen minute break before re
eatin
the same
Equipment not suitable for use in the presence of fammable anaesthetic
mixture with air or ox
en or nitrous oxide
The nations #1 manufacturer of hospital cribs
CAUTION SHEET
All bolts and other fasteners must be securely tightened and maintained when crib is
put into service.
Before each usage or assembly, inspect crib for damaged hardware, loose joints,
missing parts or sharp edges.
Symbology Definitions / Technical Labels
Attention, Consult Accompanying
Documents
To Next Page
Loading...