Hardi HC5500 User Manual

9 - Menu 5 Logbook
62
Menu 5.2 Data dump
How to dump data
Enables data dump to an office printer. This could be done for example, by using the Hyper Terminal function in
Microsoft Windows. Note the Hyper Terminal has to be activated and a communication cable (ref. no. 72271600) and 12 volt
power supply to the Controller and Spray Box is needed.
The Hyper Terminal baud rate should be set at one of the following before transmitting data:
• 19200 baud
• 9600 baud (HC 6500 default)
• 4800 baud
• 2400 baud
• 1200 baud
If only the display unit is to be removed from the tractor, a 12 Volt power supply cable (ref. no. 72244500) is necessary. The
following can be printed to an office printer.
[5.2.1 Data dump of raw data]
[5.2.2 Hyper terminal service report] Permits data to be set up with a column header.

Hardi HC5500 Specifications

General

Brand	Hardi
Model	HC5500
Category	Controller
Language	English