6 - Menu 2 Setup
34
Menu 2.4 Set clock
How to set clock
If the Controller prompts for date and time, [Set clock to enable register]:
This must be done before the Controller is put into operation for the first time, otherwise no start and stop time will be
recorded in the registers.
μ
ATTENTION! If no prompt, the dealer may already have done this.
Press .
Press to menu [2 Setup].
Press .
Press to menu [2.4 Set clock].
Press to enter menu [2.4.1 SET CLOCK].
Now you can choose between 24 hour or 12 hour clock with .
Press .
Set minutes, hours, year, month, day with and .
Press to confirm.
Press and hold to exit menu system.
To Next Page
Loading...
