7 - Menu 3 Calibration
50
5. Press and hold the manual track button (11) to the direction
indicated by the arrow in the display. Display will show a counting
percentage ending with an “OK” when gain is found.
6. Afterwards same procedure is repeated for opposite direction
7. The display reads “CALIBRATION OK” when calibration has finished.
Confirm and leave menu by pressing .
Emergency Track
If a problem with the Track should occur, please see “Menu 4.7 Emergency Track”.
FINDING GAIN
Press —> XX %
3.6.6
FINDING GAIN
Ok! XX %
3.6.6
To Next Page
Loading...
