3 - Description
17
General keystrokes, Example: Tank contents
The following is a general description in keystrokes and display readout. The following example, of changing the Tank
contents value, is used to illustrate this. Try it! The same method is used in all the menus.
μ
ATTENTION! When a menu is open, the blinking number or value is the one that can be altered.
Press to enter the menu system [1 MAIN MENU].
The 2nd line will show the menu number.
The 3rd line will read the present menu.
The 4th line will show a choice.
÷
Note the menu number [1] is blinking.
Press to enter menu [1.1 Daily settings].
Press or to scroll to [1.2 Tank contents].
÷
NOTE! The last digit of the menu number [1.2] is blinking.
Press to enter [1.2 TANK CONTENTS].
÷
NOTE! The value that can be changed is blinking.
Press or to move the cursor.
Press or to set the desired value.
Press to confirm.
Press and hold, to exit the menu system.
1.2
DAILY SETTINGS
Tank contents
To Next Page
Loading...
